Frequently Asked Questions.

General Questions

  • We build standard and custom sizes to the mm.

    For example, our standard 1200mm wall-hung vanity is 500mm wide and 450mm high.

    If you need a vanity at 1150mm long x 450mm wide x 400mm high — we can build it.

  • We have a workshop in Currumbin Waters, QLD.

    If you would like to view samples or fully/partially completed vanities, please contact us in advance to arrange a visit.

  • No, we are supply only.

    Installation would need to be arranged with your builder.

  • Important: When cleaning your product, including vanities or mirrored cabinets, we recommend using a clean microfibre cloth with warm water and a pH-neutral soap only. Be sure to dry off any excess moisture afterward

    Never use abrasive materials such as scourers or harsh chemical cleaners containing bleach, acidic substances, alcohol, solvents, or ammonia, as these can damage the coating, stone, or mirror over time.

    You may also wish to use cleaning products that have been specially formulated for this purpose, including:

    While our timber tops have been coated with clear resin and hard wax oils for enhanced protection and durability, it is important to always wipe up any spills and avoid leaving water or other bathroom products to sit and pool for prolonged periods of time.

    Water or other liquids left on any treated timber for extended periods may cause damage.

  • Generally, 4-5 weeks for custom timber-look laminate vanities and 8-10 weeks for timber.

    The current lead time would be communicated to you before placing an order.

  • We are primarily a custom, made-to-order business; however, we may have a small number of in stock vanities available from time to time.

    Please see our In Stock page for current availability.

  • Our workshop is located at Unit 10, 16 Nuban St, Currumbin Waters, QLD.

  • Yes, we use third-party freight providers, including TNT, Northline, & Mainfreight.

    Contact us with your postcode and suburb for a delivery estimate.

Timber Range

  • We offer both!

    Solid Hardwoods: We use sustainably-grown Australian native hardwoods, including Blackbutt, Spotted Gum, and Tasmanian Oak. We also stock American Oak.

    Our standard thickness is 20mm, with 40mm available upon request.

    If you are after a particular hardwood not listed above, please let us know and we’ll see if we can accomodate.

    Veneer: We can also build your vanity from a range of timber veneers, including but not limited to Blackbutt, Tasmanian Oak, Spotted Gum, American Oak, European Oak, New Guinea Rose, and many more upon request. This is a more affordable option than solid hardwood.

  • All of our vanities have 16mm High Moisture-Resistant particle board internals.

    The standard is white. You can also choose dark grey.

  • We use Blum drawers with full extension and soft-close features.

    Your choice of pull or push-to-open mechanisms.

  • Your choice of timber or stone.

    The standard stone we use is 20mm engineered stone, which is crystalline silica free, from leading brands such as Caesarstone, Quantum Zero, and YDL.

    If you have a particular stone in mind (natural or engineered), we can try to source it for you.

    If you have your own stone, we can supply the vanity without a top.

  • All of our timber vanity tops are protected with durable finishes, such as Hard Wax Oil, clear 2Pac, and resin.

    However, timber vanities should always be treated as natural products, and water or other liquids should not be left to sit or pool for prolonged periods.

    Prolonged exposure to water on any treated timber may cause damage over time.

  • Yes, we offer free samples.

    Please contact us to arrange them.

Timber-Look Range

  • Our timber vanities are handcrafted from your choice of 20mm solid hardwood or 18mm timber veneer.

    Our ‘timber-look’ vanities are built from high-quality 16mm woodgrain laminate from brands like Laminex, Polytec, and Tesrol.

  • Yes, if you have Laminex, Polytec, or Tesrol in other areas of your home, we can build a vanity to match.

  • The standard top we use for our timber-look range is 20mm engineered stone, which is crystalline silica free.

    Our standard stone is currently 20mm Snow by Caesarstone.

    If you have a particular stone in mind, we can try to source it for you.

  • Yes, if you'd like to pair our vanity with your own stone or another top purchased separately, we can supply the vanity without a top.

  • We don't supply handles; however, you can purchase any handles you like, and we can fit them for you.

  • We offer over 100 cabinetry drawer and door styles to choose from, including a wide range of shaker, flute, and many other options.

    Enquire about them here.